LIGHT BULBS, FUSES and FUSE & FLASHER SETS 

Genuine
1956-71 GM
GUIDE T-3® HEADLIGHT BULBS
One of our most popular items!
Don't sacrifice safety with burnt-out, dim, cloudy,
pitted, discolored, hard-to-find or incorrect headlight bulbs.

Download a free T3 Headlight Bulb Chart (.pdf format)
 


 

  Only Lectric Limited's Headlight Bulbs are:
       Brand new reproduction sets
       Produced using original factory blueprints
       Correct! Having the original T-3® and GUIDE insignia
       25% brighter than original bulbs
       Built for longer bulb life
       Officially Licensed
       Made by an OEM manufacturer in the U.S.A.
       Available for many GM makes/models - see below
       Sold in complete sets only (2 or 4 bulb sets)
     Great care was taken to improve the photometrics and candlepower of these bulbs
     in order to meet the current Federal Highway Safety Standards, without compromising
     the original lens prescription.


FOR A VERY LIMITED TIME...
We are offering some of our 5-3/4" T-3
® headlight bulbs individually.
In order to clear-out our excess limited inventory, we are allowing
our customers to buy a single hi-low beam bulb
(and not have to buy the entire set of 4 bulbs).
These bulbs are brand new and fully guaranteed.

$39 per hi-low beam bulb.
This offer applies only to the hi-low beam bulb.
Hi-beam bulbs and 7" bulbs can not be purchased individually. Quantities are limited.

Once these limited quantity individual bulbs are sold-out
they will no longer be available for sale individually.

Of course, you can always buy the complete bulb sets.
Consult our
on-line catalog & order form for your application & price.
 

 Our 1956-68 bulbs
 will fit, and be
 correct for,
 all 1956-58
 GM vehicles with
 a 2 headlight bulb
 system using
 7" bulbs.

 Bulb Size: 7"

 Complete set
  includes
 (2) hi-low beam
 bulbs.

 Part #: SB5657S



 

 Our 1958-59 bulbs
 will fit, and be
 correct for,
 all 1958-59
 GM vehicles with
 a 4 headlight bulb
 system using
 5-3/4" bulbs.

 Bulb Size: 5-3/4"

 Complete set
  includes
 (2) hi-low beam &
 (2) hi beam bulbs.

 Part #: SB5859S



 

 

 Our 1959-69 bulbs
 will fit, and be
 correct for,
 all 1959-69
 GM vehicles with
 a 2 headlight bulb
 system using
 7" bulbs.

 Bulb Size: 7"

 Complete set
  includes
 (2) hi-low beam
 bulbs.

 Part #: SB6169S



 

 Our 1960-67 bulbs
 will fit, and be
 correct for,
 all 1960-67
 GM vehicles with
 a 4 headlight bulb
 system using
 5-3/4" bulbs.

 Bulb Size: 5-3/4"

 Complete set
  includes
 (2) hi-low beam &
 (2) hi beam bulbs.

 Part #: SB6067S


 Our 1968-71 bulbs
 will fit, and be
 correct for,
 all 1968-71
 GM vehicles with
 a 4 headlight bulb
 system using
 5-3/4" bulbs.

 Bulb Size: 5-3/4"

 Complete set
  includes
 (2) hi-low beam &
 (2) hi beam bulbs.

 Part #: SB6871S



 
NOTE: Our 5-3/4" Bulb Set (part# SB6871S) will also fit 1972-73 GM cars & trucks with a
4 headlight bulb system, but will not be 100% correct as far as car show judging
is concerned. However,
they will be substantially closer to original than bulbs
from an auto part's store.

Why you shouldn't buy an old bulb (used or N.O.S.)?
If you were to buy an N.O.S. (new old stock) bulb from a vendor at a swap meet, the going price per bulb would almost equal what we charge for our complete set. And what the vendor doesn't tell you is that when you go to energize your newly purchased N.O.S. bulb, it may instantly burn out, or is certainly destined for a very short life. Obviously. this is also true of bulbs purchased from junk yards.

The reason is simple; these bulbs were not designed to last 40 years. What happens to these bulbs (even never used bulbs) is that over time, they can develop cracks in the varnish (seal) on the back of the bulb. Once a crack develops, air can enter the bulb (which is under a sealed vacuum), and the filament will instantly burn out if power is applied.

Why do we sell our bulbs in complete sets (not individually)?
In order to comply with the current lighting standards, our new T-3 bulbs had to be manufactured to meet current federal lighting standards.  Consequently, our T-3 bulbs are about 25% brighter than the originals.  They do not project the typical dim, yellow cast as the original bulbs did; leading to difficult night time driving.  (For those of you who are concerned about having your car judged, the level of bulb "brightness" is not a judging criteria - but at least you'll be able to see when you drive)  If you were to replace only one bulb, you would instantly notice the brightness difference when placed side-by-side to your old, original bulbs.

Download a free T3 Headlight Bulb Chart (.pdf format)

Consult our on-line catalog & order form for your application & price.

 

1953-82 CORVETTE & 1955-57 CHEVROLET
SMALL BULB SETS

The restorer's "ULTIMATE" bulb set. It replaces all interior and exterior light bulbs
in your car (except headlights and some optional equipment bulbs).
Includes instructions on the location of each bulb.
These sets eliminate hunting for information on hard-to-find bulbs or having to buy
full boxes of each bulb just to use one or two bulbs from that box.
 

Consult our on-line catalog & order form for your application & price.

 

1953-82 CORVETTE
FUSE and FLASHER SETS

Lectric Limited's Fuse and Flasher Sets are a must for anyone installing a new
dash harness in their car, or those who might run into trouble on the road.

These sets include all the fuses and the flasher(s) required for a
complete installation. They are replacement fuse & flashers.
In addition, a spare of all fuse sizes and a fuse removal tool is also included.

Consult our on-line catalog & order form for your application & price.

VFK7577 Fuse & Flasher Set shown above
-------------------------------------------------------------------------------


VFK7900 Fuse & Flasher Set shown above

 

GLO-BLO FUSE SET   When it blows . . . it glows

  Day or night when a GLO-BLO fuse blows, an integrated red L.E.D. fault
  indicator on top of the fuse indicates immediately which fuse needs replacing!

  - Saves time and effort…Eliminates guesswork and testing!
  - Makes trouble-shooting a snap, even in the dark!
  - Built to exacting OEM specifications.
  - Ideal for troublesome circuits where fuses often blow
  - Snaps into place without the use of tools
  - Easy identification of blown fuses in hard to reach locations.
  - Color-coded as original
  - Fast Acting
  - UL & CE approved. "Good Design" award winning device.

Lectric Limited's "GLO-BLO" 7 pc. fuse set is the most complete set available containing a 5A, 7.5A, 10A, 15A, 20A & 30A fuse.  NOTE: Make certain that the key is in the "on" position to verify fuse is blown.


Simulated blown fuse is easy to locate, even when you can barely see
the fuse block under your dash.  Makes fuse replacement easy!

2 blade-type sizes available:
ATC201 - ATC/ATO "standard" blade, 0.75" wide.
Primarily used on vehicles built between the late 1970s & mid 1990s.

ATM101 - ATM "mini" blade, 0.43" wide.
Primarily used on vehicles built after mid 1990s.

Consult our on-line catalog & order form for your application & price.

 

 

 
 

Lectric Limited, Inc.
Manufacturer of Corvette, Chevrolet, GM, Chrysler, AMC & Jeep Wiring and Electrical Products!
6750 W. 74th St. - Suite A - Bedford Park, IL 60638 - U.S.A.
Phone:
708-563-0400 Local  -or-  866-624-1850 Toll-Free
www.ClassicCarElectrical.com