Description
Tech Notes
1" black vinyl, non-adhesive, 100 ft. roll,
You have not selected a vehicle.
Also fits*:
*This fit is only a guideline. Please verify the fit by entering your specific vehicle.
- 1967 CHEVROLET CAMARO
- 1968 CHEVROLET CAMARO
- 1969 CHEVROLET CAMARO
- 1970 CHEVROLET CAMARO
- 1971 CHEVROLET CAMARO
- 1972 CHEVROLET CAMARO
- 1973 CHEVROLET CAMARO
- 1974 CHEVROLET CAMARO
- 1975 CHEVROLET CAMARO
- 1976 CHEVROLET CAMARO
- 1977 CHEVROLET CAMARO
- 1978 CHEVROLET CAMARO
- 1979 CHEVROLET CAMARO
- 1980 CHEVROLET CAMARO
- 1981 CHEVROLET CAMARO
- 1982 CHEVROLET CAMARO
- 1983 CHEVROLET CAMARO
- 1984 CHEVROLET CAMARO
- 1985 CHEVROLET CAMARO
- 1986 CHEVROLET CAMARO
- 1987 CHEVROLET CAMARO
- 1988 CHEVROLET CAMARO
- 1989 CHEVROLET CAMARO
- 1990 CHEVROLET CAMARO
- 1991 CHEVROLET CAMARO
- 1992 CHEVROLET CAMARO
- 1993 CHEVROLET CAMARO
- 1994 CHEVROLET CAMARO
- 1995 CHEVROLET CAMARO
- 1996 CHEVROLET CAMARO
- 1997 CHEVROLET CAMARO
- 1998 CHEVROLET CAMARO
- 1999 CHEVROLET CAMARO
- 2000 CHEVROLET CAMARO
- 2001 CHEVROLET CAMARO
- 2002 CHEVROLET CAMARO
Part SKU: id-r58276s-0001
TECH NOTES:
This is the correct non-adhesive black vinyl tape used to wrap a wiring harness. Unlike regular electrical tape which can slime-over after a period of time, this tape does not have adhesive so it will not melt in the high-temperature engine compartment. This tape clings to itself when overlapped and will need to be tied-off with a knot at the end of the run.
In regards to tape width, there is no right or wrong tape width to use when re-taping a harness.
We offer 100 ft. rolls in 3 widths: 3/4", 1" or 1-1/4":
We recommend using the 3/4" width roll when wrapping a small diameter harness (10 wires or less, for example) as it will be easier to work with, and result in less wrinkles.
We recommend using the 1" or 1-1/4" width when wrapping a dash harness or similar large diameter harness as it will use less linear feet of tape than the 3/4" width roll.
This is the correct non-adhesive black vinyl tape used to wrap a wiring harness. Unlike regular electrical tape which can slime-over after a period of time, this tape does not have adhesive so it will not melt in the high-temperature engine compartment. This tape clings to itself when overlapped and will need to be tied-off with a knot at the end of the run.
In regards to tape width, there is no right or wrong tape width to use when re-taping a harness.
We offer 100 ft. rolls in 3 widths: 3/4", 1" or 1-1/4":
We recommend using the 3/4" width roll when wrapping a small diameter harness (10 wires or less, for example) as it will be easier to work with, and result in less wrinkles.
We recommend using the 1" or 1-1/4" width when wrapping a dash harness or similar large diameter harness as it will use less linear feet of tape than the 3/4" width roll.
