This harness will allow you to easily replace your clock with a 1981-82 oil temperature gauge and sending unit without cutting or splicing any wiring. Intended for use with, but does not include, the original style oil temperature gauge and sending unit.
Additional information
Lectric Limited Part #
VOT7778
WebID Part #
id-vot7778-0001
Weight
0.3 lbs
You have not selected a vehicle
Also fits*:* This fit is only a guideline. Please verify the fit by entering your specific vehicle.
Make
Model
Years
CHEVROLET
CORVETTE
1977 - 1978
CONNECTS TO: - Dash Harness Buzzer Connection (on side of fuse block) - Ground to Alarm System Relay Mounting Bolt (in console) - Oil Temperature Gauge - Oil Temperature Sending Unit
This handy cut-off switch lets you quickly and easily disconnect your battery for safety when... see moreThis handy cut-off switch lets you quickly and easily disconnect your battery for safety when servicing your vehicle or in storage, to eliminate battery drain while vehicle is not in use, and for security as an anti-theft device. Install on the negative post of your battery, attach battery cable to the switch and you're done! To engage power just hand tighten the green knob. To disconnect power, slightly loosen the knob or, on this top-post model, completely remove the knob to discourage unauthorized use while stored at home, parked, or when traveling.
all 2nd design: VIN ending in 27373 to 49213, alarm switch located in driver side... see moreall 2nd design: VIN ending in 27373 to 49213, alarm switch located in driver side door lock cylinder & alarm horn located behind driver side front fender, near firewall Note: Requires use of VPL7778 to complete wiring to front parking/turn signal lights
Keeps your battery fully charged and maintained to extend battery life. Monitoring circuitry automatically turns... see moreKeeps your battery fully charged and maintained to extend battery life. Monitoring circuitry automatically turns charger on & off as needed. Fully protected against overcharging, short circuits, and reverse polarity. Features red/green LED indicator light status. Includes both clamp and fused ring-terminal connection adapters. Works on all 6 or 12 volt lead-acid Wet/AGM/Gel batteries. Plug charger it into any 110 volt socket, connect to your battery, and forget about it!
Memorial Day Sale! Follow us on