front single center dash speaker, Use when installing original, replacement, or aftermarket speaker. Made with correct connector for hook-up to current GM replacement speaker and correct connector for connection to original radio or radio harness. You can cut off connector for hook-up to current GM replacement speaker and solder wires directly to original speaker (as was done originally) or aftermarket speaker.
Additional information
Lectric Limited Part #
33423
WebID Part #
id-33423-0001
Weight
0.1 lbs
You have not selected a vehicle
Also fits*:* This fit is only a guideline. Please verify the fit by entering your specific vehicle.
Make
Model
Years
OLDSMOBILE
CUTLASS/442/F-85
1964 - 1965
OLDSMOBILE
FULLSIZE
1966 - 1968
OLDSMOBILE
TORONADO
1966 - 1970
PONTIAC
FULLSIZE/GRAND PRIX
1963 - 1968
PONTIAC
TEMPEST/LEMANS/GTO/T-37/GRAND AM/VENTURA
1964 - 1967
CONNECTS TO: - Ground Wire (optional, for replacement or aftermarket speaker) - Radio Speaker Output Connector - Speaker
1" black high temperature, adhesive, 100 ft. roll, Note: This is high temperature tape, commonly... see more1" black high temperature, adhesive, 100 ft. roll, Note: This is high temperature tape, commonly used on Transistor Ignition Harnesses or on parts of harnesses which route in areas exposed to high temperatures, near exhaust manifolds, over intake manifolds, etc.
-replacement made in Taiwan-, Replaces 12 volt flasher #'s 142, 143, 144, 145, 223, 224,... see more-replacement made in Taiwan-, Replaces 12 volt flasher #'s 142, 143, 144, 145, 223, 224, 323, AP273, AP373, SF224, SF323, SF323YB, ZN232, and ZN332. Will flash turn signals at the correct rate, unlike other aftermarket flashers!! (has a silver round metal housing)
Conveniently charge/maintain your vehicle's battery through the cigarette lighter or power plug port. Fuse protected... see moreConveniently charge/maintain your vehicle's battery through the cigarette lighter or power plug port. Fuse protected with 12" cord. Connects to Battery Butler Storage Charger (BBFC100 & BBFC200). Note: Adapter should only be used in a cigarette lighter or power plug port that is NOT energized by the ignition switch.