driver side, Note: Wires to be soldered onto switch inside seat belt buckle assembly and... see moredriver side, Note: Wires to be soldered onto switch inside seat belt buckle assembly and connect to the Seat Belt Warning Harness
Air Conditioning Harness to compressor, V8, with idle stop solenoid lead wireAir Conditioning Harness to compressor, V8, with idle stop solenoid lead wire
Keeps your battery fully charged and maintained to extend battery life. Monitoring circuitry automatically turns... see moreKeeps your battery fully charged and maintained to extend battery life. Monitoring circuitry automatically turns charger on & off as needed. Fully protected against overcharging, short circuits, and reverse polarity. Features red/green LED indicator light status. Includes both clamp and fused ring-terminal connection adapters. Works on all 6 or 12 volt lead-acid Wet/AGM/Gel batteries. Plug charger it into any 110 volt socket, connect to your battery, and forget about it!
3/4" black cotton cloth, adhesive, 60 ft. roll, Note: This is not high temperature tape3/4" black cotton cloth, adhesive, 60 ft. roll, Note: This is not high temperature tape