****CUSTOMER MUST SUPPLY A DONOR HARNESS WITH A USABLE FUSE BLOCK. PHONE-IN ORDER ONLY; PLEASE DO NOT ORDER THIS ITEM ONLINE.****
Additional information
Lectric Limited Part #
05205
OEM Part #
02987079
WebID Part #
id-05205-0001
Weight
3.0 lbs
You have not selected a vehicle
Also fits*:* This fit is only a guideline. Please verify the fit by entering your specific vehicle.
Make
Model
Years
OLDSMOBILE
CUTLASS/442/F-85
1965
~~TECH. INFO / NOTES~~
What is General Motors' C.A.C. A/C?
Cars of this era were either manufactured with:
- C.A.C. C.A.C. stood for "Cool Air Comfort" fresh air ventilation only. This ventilation system used a manually-operated slider cable to open/close a ventilation door near the floorboard. There is no wiring involved with C.A.C. only cars. C.A.C. could either be ordered separately without air-conditioning, or it came automatically installed on all factory-installed A/C cars of that era.)
- C.A.C. A/C. This meant C.A.C. + optional factory installed "Basic" air-conditioning. "Basic" air-conditioning meant that it was not a user-settable temperature / climate controlled air-conditioning like the trade named Comfortron or Circ-L-Aire (for example).
- COMFORTRON, CIRC-L-AIRE, or other user-settable temperature / climate control A/C systems. These were factory installed air-conditioning systems, only installed on fullsize cars, and were a RARE factory option.
- COOL PACK A/C. This was an optional under dash air-conditioning unit, usually dealer installed. Lectric Limited does not manufacture the wiring for the Cool Pack A/C system itself. However, if you have the Cool Pack A/C system, you can buy the Lectric Limited wiring for a non-A/C car, and re-use your original wiring from the dealer-installed Cool Pack A/C.
This handy cut-off switch lets you quickly and easily disconnect your battery for safety when... see moreThis handy cut-off switch lets you quickly and easily disconnect your battery for safety when servicing your vehicle or in storage, to eliminate battery drain while vehicle is not in use, and for security as an anti-theft device. Install on the negative post of your battery, attach battery cable to the switch and you're done! To engage power just hand tighten the green knob. To disconnect power, slightly loosen the knob or, on this top-post model, completely remove the knob to discourage unauthorized use while stored at home, parked, or when traveling.
GM H.E.I. (High Energy Ignition) style distributor. Order the correct harness part # for your... see moreGM H.E.I. (High Energy Ignition) style distributor. Order the correct harness part # for your car along with this modification part #. The harness you need to order is usually the Engine Harness, but can be the Dash Harness. To verify, check the wiring going to the ignition coil and ballast resistor (if applicable) in your car.
20-14 gauge terminal crimper, not intended for use with Weather-Pak or Metri-Pac terminals requiring rubber... see more20-14 gauge terminal crimper, not intended for use with Weather-Pak or Metri-Pac terminals requiring rubber seals