Also fits*:* This fit is only a guideline. Please verify the fit by entering your specific vehicle.
Make
Model
Years
CHEVROLET
CORVETTE
1973 - 1982
TECH NOTES:
Our switch is manufactured per the original GM blueprint specifications and utilizes a 3/8"-24 Type "C" thread. Per GM specifications, our switch is designed to cut its own threads when installed into a .348" diameter non-threaded hole in the switch mounting/backing plate.
Our switch should easily fit, and screw into an original mounting/backing plate.
However, it has come to our attention that there my be problems when installing our switch into some (or all) of the currently reproduced mounting/backing plates. The reason is that these reproduction mounting/backing plates have a smaller hole size and are pre-threaded.
1" black high temperature, adhesive, 100 ft. roll, Note: This is high temperature tape, commonly... see more1" black high temperature, adhesive, 100 ft. roll, Note: This is high temperature tape, commonly used on Transistor Ignition Harnesses or on parts of harnesses which route in areas exposed to high temperatures, near exhaust manifolds, over intake manifolds, etc.
driver side, all 1st design: with seat belt interlock system Note: Wires to be soldered... see moredriver side, all 1st design: with seat belt interlock system Note: Wires to be soldered onto switch inside seat belt buckle assembly and connect to the Rear Body Harness