-H.E.I.-, V8, 396 C.I., with warning lights & C.A.C. A/C Note: Modified for use with a GM H.E.I. distributor
Additional information
Lectric Limited Part #
39240
OEM Part #
06286863
WebID Part #
id-39240-0001
Weight
0.9 lbs
You have not selected a vehicle
Also fits*:* This fit is only a guideline. Please verify the fit by entering your specific vehicle.
Make
Model
Years
CHEVROLET
FULLSIZE 1958 & UP
1965
TECH. NOTES:
What is General Motors' C.A.C. A/C?
Cars of this era were either manufactured with:
- C.A.C. C.A.C. stood for "Cool Air Comfort" fresh air ventilation only. This ventilation system used a manually-operated slider cable to open/close a ventilation door near the floorboard. There is no wiring involved with C.A.C. only cars. C.A.C. could either be ordered separately without air-conditioning, or it came automatically installed on all factory-installed A/C cars of that era.)
- C.A.C. A/C. This meant C.A.C. + optional factory installed "Basic" air-conditioning. "Basic" air-conditioning meant that it was not a user-settable temperature / climate controlled air-conditioning like the trade named Comfortron or Circ-L-Aire (for example).
- COMFORTRON, CIRC-L-AIRE, or other user-settable temperature / climate control A/C systems. These were factory installed air-conditioning systems, only installed on fullsize cars, and were a RARE factory option.
- COOL PACK A/C. This was an optional under dash air-conditioning unit, usually dealer installed. Lectric Limited does not manufacture the wiring for the Cool Pack A/C system itself. However, if you have the Cool Pack A/C system, you can buy the Lectric Limited wiring for a non-A/C car, and re-use your original wiring from the dealer-installed Cool Pack A/C.
front single dash speaker, cars built before November 4, 1964 Use when installing original, replacement,... see morefront single dash speaker, cars built before November 4, 1964 Use when installing original, replacement, or aftermarket speaker. Made with correct connector for hook-up to current GM replacement speaker and correct connector for connection to original radio or radio harness. You can cut off connector for hook-up to current GM replacement speaker and solder wires directly to original speaker (as was done originally) or aftermarket speaker.
for single power window switch, with 3 terminals in a triangular pattern (includes pigtail)for single power window switch, with 3 terminals in a triangular pattern (includes pigtail)
column shift automatic trans., with warning lights, without A/C Note: This harness is used with... see morecolumn shift automatic trans., with warning lights, without A/C Note: This harness is used with a DASH INSTRUMENT CLUSTER HARNESS to complete under dash wiring