all 2nd design: metal headlight buckets (includes pair of pre-assembled harnesses)
Additional information
Lectric Limited Part #
VHX6367
OEM Part #
02985626
WebID Part #
id-vhx6367-0002
Weight
0.2 lbs
You have not selected a vehicle
Also fits*:* This fit is only a guideline. Please verify the fit by entering your specific vehicle.
Make
Model
Years
CHEVROLET
CORVETTE
1963 - 1967
TECH NOTES:
ALL 1963 Corvette headlight buckets were originally made of fiberglass. So, our Headlight Bucket Extension Harness (part # VHX6300), designed for use with fiberglass headlight buckets, is manufactured correctly.
However, if a fiberglass headlight bucket got damaged and needed replacing, the only available option was a replacement headlight bucket made of metal.
Through the years, many of the original 1963 Corvette fiberglass headlight buckets were replaced with the metal ones. Consequently, the wiring had to be changed.
We offer a Headlight Bucket Extension Harness (part# VHX6367) for those 1963 Corvettes that have the newer, metal buckets.
If you are not sure if you have a fiberglass or metal headlight bucket, put a magnet to it!
use when installing a driver side mount axial compressor on the passenger side, in place... see moreuse when installing a driver side mount axial compressor on the passenger side, in place of a correct passenger side mount axial compressor (from Air Conditioning Harness compressor connector to compressor)
all with backup lights without air conditioning. Includes VLK6300, VMA6300WB, VDW5570, VIG6300, VHL6300M, VFK6300, VHX6300,... see moreall with backup lights without air conditioning. Includes VLK6300, VMA6300WB, VDW5570, VIG6300, VHL6300M, VFK6300, VHX6300, VRH6300WB, & VWD6300. ****(IF CAR HAS REPLACEMENT 1964-1967 METAL HEADLIGHT BUCKETS IN PLACE OF ORIGINAL FIBERGLASS HEADLIGHT BUCKETS, MUST ALSO ORDER PART NUMBER VSOP6300MB)**** Retail price reflects a 10% savings, PLUS retail customers receive 10% off any additional products on the same order! Options: --No Additional Option
--ORIGINAL DESIGN SERIES WIRING HARNESS SET OPTION: all with AFTERMARKET air conditioning
--ORIGINAL DESIGN SERIES WIRING HARNESS SET OPTION: all with factory air conditioning
--ORIGINAL DESIGN SERIES WIRING HARNESS SET OPTION: all without air conditioning. For use with alternator / voltage regulator / and horn relay re-located from original passenger side location to driver side
--ORIGINAL DESIGN SERIES WIRING HARNESS SET OPTION: all with replacement 1964-1967 metal headlight buckets in place of original 1963 fiberglass headlight buckets
all with AM radio (wiring from inside radio to speaker) Use when installing original, replacement,... see moreall with AM radio (wiring from inside radio to speaker) Use when installing original, replacement, or aftermarket speakers. Made with correct connector for hook-up to current GM replacement speaker and correct connector for connection to original wiring, or cut off connector for hook-up to current GM replacement speaker and solder wires directly to original speaker (as was done originally) or aftermarket speaker