-reproduction-, all (mounts to brake pedal bracket, connects to white wire in Dash Harness brake light switch connectors)
Additional information
Lectric Limited Part #
01960962
OEM Part #
01960962
WebID Part #
id-01960962-0002
Weight
0.1 lbs
You have not selected a vehicle
Also fits*:* This fit is only a guideline. Please verify the fit by entering your specific vehicle.
Make
Model
Years
CHEVROLET
CORVETTE
1963
TECH NOTES:
Ignition systems, charging systems, electrical devices, and switches can create magnetic pulses. These pulses are in the same frequency range as AM-band radio signals, resulting in radio "noise".
This radio noise suppression capacitor diverts this noise to ground so it isn't heard through the radio's speakers as an annoying buzz or whine.
There can be several radio capacitors in a vehicle.
As with any electrolytic capacitor, radio capacitors have a limited life and will degrade over time as the internal electrolyte evaporates; especially in areas of temperature extremes (hot or cold).
all (includes pair of pre-assembled light sockets, tubing, wiring, & correct molded connectors) NOTE: Designed... see moreall (includes pair of pre-assembled light sockets, tubing, wiring, & correct molded connectors) NOTE: Designed to replace only the light sockets and wiring. Original front parking/turn signal light assembly was comprised of a bezel/housing with a non-removable light socket and wiring. Customer must decide best method to remove the old, then re-attach the new, light socket to bezel/housing.
3/4" black cotton cloth, adhesive, 60 ft. roll, Note: This is not high temperature tape3/4" black cotton cloth, adhesive, 60 ft. roll, Note: This is not high temperature tape
Engine Harness to blower motor or radio capacitor, adapter lead allows use of a non-original... see moreEngine Harness to blower motor or radio capacitor, adapter lead allows use of a non-original blower motor (flat male-type power terminal on blower motor or radio capacitor)
all 1st design: fiberglass headlight buckets (includes pair of pre-assembled harnesses with grommets)all 1st design: fiberglass headlight buckets (includes pair of pre-assembled harnesses with grommets)