-reproduction-, all (mounts to ignition shielding bracket, connects to positive post on coil)
Additional information
Lectric Limited Part #
01960958A
OEM Part #
01960958
WebID Part #
id-01960958a-0001
Weight
0.1 lbs
You have not selected a vehicle
Also fits*:* This fit is only a guideline. Please verify the fit by entering your specific vehicle.
Make
Model
Years
CHEVROLET
CORVETTE
1963 - 1965
TECH NOTES:
Ignition systems, charging systems, electrical devices, and switches can create magnetic pulses. These pulses are in the same frequency range as AM-band radio signals, resulting in radio "noise".
This radio noise suppression capacitor diverts this noise to ground so it isn't heard through the radio's speakers as an annoying buzz or whine.
There can be several radio capacitors in a vehicle.
As with any electrolytic capacitor, radio capacitors have a limited life and will degrade over time as the internal electrolyte evaporates; especially in areas of temperature extremes (hot or cold).
all (includes pair of pre-assembled light sockets, tubing, wiring, & correct molded connectors) NOTE: Designed... see moreall (includes pair of pre-assembled light sockets, tubing, wiring, & correct molded connectors) NOTE: Designed to replace only the light sockets and wiring. Original front parking/turn signal light assembly was comprised of a bezel/housing with a non-removable light socket and wiring. Customer must decide best method to remove the old, then re-attach the new, light socket to bezel/housing.
all without backup lights or air conditioning. Includes VMA6300NB, VIG6300, VHL6300M, VHX6300, & VRH6300NB. ****(IF... see moreall without backup lights or air conditioning. Includes VMA6300NB, VIG6300, VHL6300M, VHX6300, & VRH6300NB. ****(IF CAR HAS REPLACEMENT 1964-1967 METAL HEADLIGHT BUCKETS IN PLACE OF ORIGINAL FIBERGLASS HEADLIGHT BUCKETS, ALSO ORDER PART NUMBER VSOP6300MB)**** Retail price reflects a 10% savings! Options: --No Additional Option
--ORIGINAL DESIGN SERIES WIRING HARNESS SET OPTION: all with AFTERMARKET air conditioning
--ORIGINAL DESIGN SERIES WIRING HARNESS SET OPTION: all with factory air conditioning
--ORIGINAL DESIGN SERIES WIRING HARNESS SET OPTION: all without air conditioning. For use with alternator / voltage regulator / and horn relay re-located from original passenger side location to driver side
--ORIGINAL DESIGN SERIES WIRING HARNESS SET OPTION: all with replacement 1964-1967 metal headlight buckets in place of original 1963 fiberglass headlight buckets
for use only with our RestoMod Series wiring system, should your headlight switch become damaged... see morefor use only with our RestoMod Series wiring system, should your headlight switch become damaged or in need of replacement. NOTE: This switch is already included with our RestoMod Series wiring system.