FREE T-SHIRT with $300 order. Follow us on 
Description
for use only with our RestoMod Series wiring system, should your ignition switch become damaged or in need of replacement. NOTE: This switch is already included with our RestoMod Series wiring system.
RESTOMOD SERIES IGNITION SWITCH
Part #: 510735
$52.00
You have not selected a vehicle
Additional information
- Lectric Limited Part #
- 510735
- WebID Part #
- id-510735-0002
- Weight
- 0.4 lbs
You have not selected a vehicle
Also fits*:* This fit is only a guideline. Please verify the fit by entering your specific vehicle.
| Make | Model | Years |
|---|---|---|
| CHEVROLET | CORVETTE | 1953 - 1967 |
TECH NOTES:
This ignition switch is already included in our RestoMod Series wiring system and does not need to be purchased separately.
However, if your switch becomes damaged or in need of replacement, this switch kit will service your RestoMod Series wiring system.
NOTE: This switch will NOT connect to a factory original 1965-67 harness, nor our Original Design Series (OEM-type) 1965-67 harness. This switch requires use of a 1963-64 or 1965 key and tumbler, will not work with a 1966 or 1967 tumbler.
INCLUDES:
- Ignition Switch, this is the current switch included in our RestoMod Series wiring harness system
- Connector, required if you had purchased an early version RestoMod Series wiring harness system
- Terminals, included in the event a repair is necessary
- Instructions
- Spacer Nut
- Bezel/Retaining Nut
- Trim Ring
This ignition switch is already included in our RestoMod Series wiring system and does not need to be purchased separately.
However, if your switch becomes damaged or in need of replacement, this switch kit will service your RestoMod Series wiring system.
NOTE: This switch will NOT connect to a factory original 1965-67 harness, nor our Original Design Series (OEM-type) 1965-67 harness. This switch requires use of a 1963-64 or 1965 key and tumbler, will not work with a 1966 or 1967 tumbler.
INCLUDES:
- Ignition Switch, this is the current switch included in our RestoMod Series wiring harness system
- Connector, required if you had purchased an early version RestoMod Series wiring harness system
- Terminals, included in the event a repair is necessary
- Instructions
- Spacer Nut
- Bezel/Retaining Nut
- Trim Ring
CONNECTS TO:
- RestoMod Series wiring harness system only.
NOTE: This switch will NOT connect to a factory original 1965-67 harness, nor our Original Design Series (OEM-type) 1965-67 harness. This switch requires use of a 1963-64 or 1965 key and tumbler, will not work with a 1966 or 1967 tumbler.
- RestoMod Series wiring harness system only.
NOTE: This switch will NOT connect to a factory original 1965-67 harness, nor our Original Design Series (OEM-type) 1965-67 harness. This switch requires use of a 1963-64 or 1965 key and tumbler, will not work with a 1966 or 1967 tumbler.
Frequently Bought Together
-
HEADLIGHT BUCKET EXTENSION HARNESS SET
all (includes pair of pre-assembled harnesses)
ORIGINAL DESIGN SERIES WIRING HARNESS DELUXE SET
all big block coupe without backup lights. Includes VLK6566, VMA6500NB, VIG6500BB, VHL6465M, VFK6466, VHX6367, VRH6500CNB,... see more
HARNESS TAPE
1" black high temperature, adhesive, 100 ft. roll, Note: This is high temperature tape, commonly... see more
