FREE CRIMPER SET ($119 value) with purchase of RestoMod or Classic Update Wiring System. 
Description
12V Guide 5-3/4″ T-3 sealed beam bulb, 2 hi beam outer bulbs,
“BATTERY QUICK-DISCONNECT KNOB TYPE: TOP POST BATTERY” has been added to your cart. View cart
SEALED BEAM BULB PAIR
Part #: SB6871HS
$69.00
You have not selected a vehicle
Additional information
- Lectric Limited Part #
- SB6871HS
- OEM Part #
- 05956001
- WebID Part #
- id-sb6871hs-0001
- Weight
- 3.5 lbs
You have not selected a vehicle
Also fits*:* This fit is only a guideline. Please verify the fit by entering your specific vehicle.
| Make | Model | Years |
|---|---|---|
| OLDSMOBILE | TORONADO | 1968 - 1969 |
TECH NOTES:
Set contains (2) 5-3/4" hi beam bulbs.
They will fit, and be correct for 1968-69 Toronados with a (4) round sealed beam bulb system.
Lectric LimitedáT-3 Headlight Bulbs:
* Brand new reproductions.
* Improved for better brightness and longer life.
* Correct original T-3 insignia on the lens
* Correct original GUIDE insignia on the lens.
* Sold for show/display or off-road use only.
* Officially Licensed.
Don't sacrifice car show judging points with burnt-out, dim, cloudy, pitted, discolored, hard-to-find, or incorrect headlight bulbs. These bulbs are brand new.
Why you shouldn't you buy an old original bulb (used or N.O.S.)?
If you were to buy an N.O.S. (new old stock) bulb from a vendor at a swap meet, the going price per bulb would almost equal what we charge for our complete set. And what the vendor doesn't tell you is that when you go to energize your newly purchased N.O.S. bulb, it may instantly burn out, or is certainly destined for a very short life. Obviously, this is also true of bulbs purchased from a junk yard.
Why will an old original bulb (either used or N.O.S.) instantly or quickly burn-out?
The reason is simple. Original bulbs were not designed to last 50+ years. What will happen to these bulbs (even un-used bulbs) is that over time they can develop very minute cracks in the varnish seal on the back of the bulb and adjacent to the terminal posts. Once a crack or gap in the varnish seal occurs, air can enter the bulb (which is under a sealed vacuum), and the filament will instantly burn out when power is applied.
Why do we sell our bulbs in complete sets (not individually)?
If you were to replace only one your old bulbs with one of our new bulbs, you would instantly notice the difference when placed side-by-side. We want all of your headlight bulbs to have equal brightness, color and lens clarity.
T-3 is a registered trademark of Lectric Limited, Inc.
This product should not be used on the road and is sold for show/display or off-road use only. This product has not been tested for compliance with United States Federal Motor Vehicle Safety Standard FHMVSS 108, Canadian Standard CMVSS108 nor any other application requiring compliance with FHMVSS 108, CMVSS108, or Title 49 section 571.108, United States Code.
Made in China.
Set contains (2) 5-3/4" hi beam bulbs.
They will fit, and be correct for 1968-69 Toronados with a (4) round sealed beam bulb system.
Lectric LimitedáT-3 Headlight Bulbs:
* Brand new reproductions.
* Improved for better brightness and longer life.
* Correct original T-3 insignia on the lens
* Correct original GUIDE insignia on the lens.
* Sold for show/display or off-road use only.
* Officially Licensed.
Don't sacrifice car show judging points with burnt-out, dim, cloudy, pitted, discolored, hard-to-find, or incorrect headlight bulbs. These bulbs are brand new.
Why you shouldn't you buy an old original bulb (used or N.O.S.)?
If you were to buy an N.O.S. (new old stock) bulb from a vendor at a swap meet, the going price per bulb would almost equal what we charge for our complete set. And what the vendor doesn't tell you is that when you go to energize your newly purchased N.O.S. bulb, it may instantly burn out, or is certainly destined for a very short life. Obviously, this is also true of bulbs purchased from a junk yard.
Why will an old original bulb (either used or N.O.S.) instantly or quickly burn-out?
The reason is simple. Original bulbs were not designed to last 50+ years. What will happen to these bulbs (even un-used bulbs) is that over time they can develop very minute cracks in the varnish seal on the back of the bulb and adjacent to the terminal posts. Once a crack or gap in the varnish seal occurs, air can enter the bulb (which is under a sealed vacuum), and the filament will instantly burn out when power is applied.
Why do we sell our bulbs in complete sets (not individually)?
If you were to replace only one your old bulbs with one of our new bulbs, you would instantly notice the difference when placed side-by-side. We want all of your headlight bulbs to have equal brightness, color and lens clarity.
T-3 is a registered trademark of Lectric Limited, Inc.
This product should not be used on the road and is sold for show/display or off-road use only. This product has not been tested for compliance with United States Federal Motor Vehicle Safety Standard FHMVSS 108, Canadian Standard CMVSS108 nor any other application requiring compliance with FHMVSS 108, CMVSS108, or Title 49 section 571.108, United States Code.
Made in China.
Frequently Bought Together
-
TERMINAL CRIMPING TOOL
20-14 gauge terminal crimper, not intended for use with Weather-Pak or Metri-Pac terminals requiring rubber... see more
SPARK PLUG WIRE SET
V8 all (Dated 3-Q-68)
RADIO CAPACITOR: VOLTAGE REGULATOR
-reproduction-, (mounts to voltage regulator, connects to ground tab on regulator)
HARNESS TAPE
1" black high temperature, adhesive, 100 ft. roll, Note: This is high temperature tape, commonly... see more
