-original 1/2 x 14 N.P.T.F.-, except V8, 425 C.I., with A/C Note: Requires a double 56 series female terminal connection
Additional information
Lectric Limited Part #
01993561
OEM Part #
01993581
WebID Part #
id-01993561-0010
Weight
0.2 lbs
You have not selected a vehicle
Also fits*:* This fit is only a guideline. Please verify the fit by entering your specific vehicle.
Make
Model
Years
BUICK
FULLSIZE/RIVIERA
1960 - 1968
BUICK
SKYLARK/SPECIAL/GRAN SPORT
1965 - 1968
CHEVROLET
FULLSIZE 1958 & UP
1962 - 1966
CHEVROLET
TRUCK/PICK-UP/SUBURBAN/BLAZER
1962 - 1966
OLDSMOBILE
FULLSIZE
1956 - 1969
PONTIAC
FULLSIZE/GRAND PRIX
1959 - 1964
TECH NOTES:
This Temperature Sending Unit (Switch) actuates a warning light (idiot light) when the engine exceeds a specific temperature.
NOTE: Vehicles with gauges (not warning lights) should not use this sending unit. Vehicles with gauges require a different type of sending unit that varies resistance with engine temperature.
Unless necessary to prevent leaking, we recommend that you do NOT use Teflon (TM) tape, pipe compound, or any other sealant when installing this sending unit. Simply screw it in. Adding anything onto the sending unit's threads may result in improper operation.
front single dash speaker, LeSabre, Wildcat, Invicta, & Electra 225 Use when installing original, replacement,... see morefront single dash speaker, LeSabre, Wildcat, Invicta, & Electra 225 Use when installing original, replacement, or aftermarket speaker. Made with correct connector for hook-up to current GM replacement speaker and correct connector for connection to original radio or radio harness. You can cut off connector for hook-up to current GM replacement speaker and solder wires directly to original speaker (as was done originally) or aftermarket speaker.
rear single seat speaker, Riviera (wiring from rear body intermediate harness to speaker) Use when... see morerear single seat speaker, Riviera (wiring from rear body intermediate harness to speaker) Use when installing original, replacement, or aftermarket speaker. Made with correct connector for hook-up to current GM replacement speaker and correct connector for connection to original wiring, or cut off connector for hook-up to current GM replacement speaker and solder wires directly to original speaker (as was done originally) or aftermarket speaker.
Conveniently charge/maintain your vehicle's battery through the cigarette lighter or power plug port. Fuse protected... see moreConveniently charge/maintain your vehicle's battery through the cigarette lighter or power plug port. Fuse protected with 12" cord. Connects to Battery Butler Storage Charger (BBFC100 & BBFC200). Note: Adapter should only be used in a cigarette lighter or power plug port that is NOT energized by the ignition switch.